Skip to main content

5 Ways to help you remove the scratch from your mobile phone


Now everyone has a big screen smart phone, but if you do not buy a protective shell or cover, it is easy to scratch at the back rear cover or the screen, even if it was covered by the whole wrap protective case, there will inevitably be some scratches on the screen. Here are some tips that you can DIY to remove scratches on your phone, the effect is magical, have a try!
1, toothpaste

Toothpaste can be used in many occasions to scratch, toothpaste contains solid calcium carbonate, silica and other ingredients have the effect of grinding, and because of the hardness and screen glass similar, often can have a good  effect on removing scratch.
But don't use children's toothpaste to clean your phone screen. Just use regular toothpaste.First, squeeze a little bit of toothpaste on a cotton swab or a clean cloth, then paint a circle around the scratched area and wipe gently until the scratch is gone. Finally, wipe off the excess toothpaste gently.

2,vegetable oil 



Vegetable oil contains the grease component, is the natural lubricant, the slight scratch produces the sharp part is very small, the vegetable oil lubrication, can make the scratch lighter.
Drop a few drops of vegetable oil in the scratches on the screen, gently wipe the screen with a soft cloth, the method is similar to toothpaste, when the scratches become light, wipe the excess vegetable oil.

3,Baking soda

Bicarbonate of soda is the cleanser that can be used to everything, not only can conquer kitchen all besmirch, but also mobile phone .Mix the baking soda to water in a 2:1 ratio. Let the baking soda turn into a paste. Then dip a cotton swab or cloth in the baking soda and wipe the scratch gently.

4,Sandpaper


Yes, I'm as shocked as you are.But one Twitter user has successfully demonstrated that using sandpaper and a grinder can remove the edge of the crack.
However, this method is not recommended for use on the phone screen and is only suitable for removing scratches from the body.In addition, when using this method, the size of sandpaper used must be the minimum, but also pay attention to control force, otherwise the scratch will be more and more.

5, Automotive scratch remover

The remover used to deal with scratches on automobile paint can also be used on mobile phones. The usage is the same as the steps for removing scratches from toothpaste. The foreign brands of automobile scratch removers recommended by  netizen are Turtle Wax, 3M Scratch, and Swirl.
Some netizen recommend solid car wax to remove scratches. Car wax can not only remove scratches on the car paint surface, because car wax has the effect on filling small pits caused by scratches, but also it can maintain a certain form after solidification and is insoluble. In water, it is not easy to wipe off due to operation.



Grandshine has more 10 years experience in development and manufacturing phone/tablet accessories.
www.grashine.com
Labels:

Comments

Post a Comment

Popular posts from this blog

Let's stop plastic waste at its sources

  Around the world, one million plastic drinking bottles are purchased every minute, while up to 5 trillion single-use plastic bags are used worldwide every year. In total, half of all plastic produced is designed to be used only once — and then thrown away.While plastic has many valuable uses, we have become addicted to single-use or disposable plastic — with severe environmental consequences.  We have seen a lot of positive action to reduce the plastic waste such as: garbage sorting,limit the use of disposable plastic products and the developing and manufacturing of the recycling. But we need to do more, we need to stop the plastic pollution at its sources   100% Biodegradable material was tested is 100% compostable and  can be completely degraded into  carbon dioxide and Oxygen in the Under natural composting and home composting conditions . As a kind of natural degradable material, biodegradable material plays a unique role in environmental protection. Its r...
Post a Comment
Read more

A few tips to help you understand electric injection molding machines

According to the driving theory of the injection molding machine, the control system of the injection molding machine is composed of various circuits for processing power and controller to complete the movement and process actions The electric injection molding machine uses a servo motor to perform injection, plasticization, mold clamping, ejection, Therefore, it has high controllability and response characteristics ☆ Features of electric injection molding machine: -Since each action (injection, plasticization, melting, clamping and ejection) has independent servo motor drive, the electric injection molding machine consumes less energy than the hydraulically driven injection molding machine; -The use of cooling water to control the oil temperature is reduced because no hydraulic oil is used; -An oil-free environment is possible (no oil pollution); -Because there is no vibration problem in the hydraulic circuit of the traditional hydraulic system, low noise levels are...
Post a Comment
Read more